Before downloading, you must check the sticker on the bottom of your router for the (Hardware Version). Firmware is not universal across all revisions; installing firmware meant for Revision C on Revision T1 can permanently damage (brick) the device. Official Download Sources
Often, older firmware like ME-1.30 is no longer listed officially. D-link Dsl-2750u Firmware Me-1.30 Download
Official sources are now scarce because D-Link removed most legacy firmware from its global support portals after 2020. However, you can still obtain the verified file from: Before downloading, you must check the sticker on
| Problem | Solution | |--------|----------| | | This is "recovery mode." Set your PC IP to 192.168.1.2 , use D-Link’s emergency recovery tool (hold reset while powering on, then upload firmware via browser at 192.168.1.5 ). | | Wi-Fi keeps disconnecting | Change Wi-Fi channel (1, 6, or 11) → Advanced → Wireless → Channel. Also, disable "WMM" if needed. | | Can’t access 192.168.1.1 | Check your PC’s IP is on the same subnet (e.g., 192.168.1.10). Clear browser cache or try a different browser (Firefox or Edge). | | PPPoE connection fails | Re-enter your ISP username/password. For ME-1.30, ensure VLAN is set to Auto or None unless your ISP requires tagging. | | USB port stopped working | Go to Advanced → USB → Enable "File Sharing" and reboot. | Official sources are now scarce because D-Link removed
Index of /pub/ADSL/DSL-2750U/Firmware. This firmware is only compatible with hardware revision С. Please take a look at string "H/ D-Link FTP Wireless N ADSL2+ WI-FI Router DSL-2750U - D-Link