Hyt Tc580 Programming Software Full [verified] 🆒

Before you search for the software, you must have the correct programming cable. The TC580 does not use USB-B (printer cable) or a standard Ethernet connection.

Before attempting to install the software, ensure your computer meets the standard requirements for legacy radio programming: hyt tc580 programming software full

In the software, go to and select the correct COM port. Before you search for the software, you must

| Field | What to Enter | | :--- | :--- | | | e.g., "Security 1" (Max 16 characters) | | RX Frequency | The receive frequency (e.g., 461.0375) | | TX Frequency | The transmit frequency (Usually same as RX for simplex, different for repeater use) | | QT/DQT Encode | CTCSS or DCS tone for transmit (e.g., 67.0 Hz) | | QT/DQT Decode | CTCSS or DCS tone for receive (Same as encode to block interference) | | TX Power | High (5W) or Low (1W) | | Bandwidth | 25 KHz (Wide) or 12.5 KHz (Narrow). In the US, most business bands require narrowband (12.5 KHz). | | Field | What to Enter | | :--- | :--- | | | e