Use a utility like ChipGenius to confirm the exact Controller Part-Number (e.g., FC1178BC) and Flash ID.
Physical degradation of the NAND flash memory can prevent the controller from reading configuration data, defaulting it to these generic IDs. Unix & Linux Stack Exchange Repair and "Patching" Process usb device id vid ffff pid 1201 patched
Since the device uses a patched protocol, a "handshake" packet was identified via reverse engineering. The host must send a START command on the Bulk OUT endpoint ( 0x02 ) before data is streamed. Use a utility like ChipGenius to confirm the
Fixing this usually requires tricking the operating system into using an older, less restrictive driver or manually re-flashing the hardware. 1. Roll Back to an Older Driver (Most Common Fix) usb device id vid ffff pid 1201 patched
Use a utility like ChipGenius to confirm the exact Controller Part-Number (e.g., FC1178BC) and Flash ID.
Physical degradation of the NAND flash memory can prevent the controller from reading configuration data, defaulting it to these generic IDs. Unix & Linux Stack Exchange Repair and "Patching" Process
Since the device uses a patched protocol, a "handshake" packet was identified via reverse engineering. The host must send a START command on the Bulk OUT endpoint ( 0x02 ) before data is streamed.
Fixing this usually requires tricking the operating system into using an older, less restrictive driver or manually re-flashing the hardware. 1. Roll Back to an Older Driver (Most Common Fix)