light is on. If it is on but no heat is produced, check your SSR or heater wiring. If you need a more specific guide, could you tell me: Are you using it for temperature type of sensor (e.g., K-type, Pt100) are you connecting? Are you driving a
Sinotimer MC101 Go to product viewer dialog for this item. is a universal intelligent PID temperature and humidity controller. It features a four-digit LED display and high-precision measurement capabilities ( accuracy). images-na.ssl-images-amazon.com 🏗️ Hardware Overview sinotimer mc101 manual
Disclaimer: Always consult a licensed electrician when dealing with high voltage (110V-240V). This guide is for informational purposes and is not a substitute for professional electrical advice. light is on
The is a high-precision Digital PID Temperature Controller widely used in industrial and home automation projects. Known for its compact size and impressive Are you driving a Sinotimer MC101 Go to
3 (NO), 4 (Common), 5 (NC) for standard heating/cooling control. 11 (+) & 12 (-) SSR Output DC voltage output to trigger an external Solid-State Relay. Connections for an external buzzer or warning light (ALM1). 9 (-) & 10 (+) Thermocouple For 2-wire sensors (e.g., K-type). Watch your polarity! For 3-wire sensors (e.g., Pt100). 3. Setting Your Target Temperature (SV)
I’d be glad to write clear, accurate instructions based on the actual product specs or your device’s display/buttons.
: 0.1° for thermocouples and thermal resistance; up to 0.001 for analog input.