The terminal block (rising cage clamp, accepts 0.5mm² – 2.5mm² wire) is arranged as follows:
Tamper Return and Tamper Supply (connect to panel tamper zone). elmdene 7422-sfg-g3f manual
Connecting the sounder requires matching the terminals to your control panel. Below are the standard terminal definitions from the Elmdene Technical Guide Description Wiring Action Permanent Positive Connect to the permanent +12V supply (Hold-off +). Permanent Negative Connect to the permanent 0V supply (Hold-off -). Siren Trigger Negative trigger for the siren; transitions from 12V to 0V. Strobe Trigger Negative trigger for the strobe light. Tamper Return Sends the tamper signal back to the panel. Tamper Source for a single unit or the last unit in a series. Battery Conn Connect the battery leads applying main power. Engineer Input The terminal block (rising cage clamp, accepts 0
Includes "Ring Line Monitoring" and "Remote Test" inputs for advanced system health diagnostics. Installation Overview Permanent Negative Connect to the permanent 0V supply